AP-1061-POE: 802.11g Wireless LAN Outdoor Access Point IP67 Casing
  The AP-1061-POE an Acess Point conforms to the final IEEE 802.11g standard, and is also fully inter-operable with legacy 11Mbps 802.11b devices. Capable of a wireless data rate up to 54 Mbps (turbo mode at 108Mbps), it works perfectly to meet your increasing mobile computing needs.
Built-in security and reliability features ensure the privacy of wireless transmissions. 152-bit Encryption and advanced WPA Dynamic Key provide comprehensive protection of communications and sensitive data on wireless LAN.
The Turbo AP offers enhanced security features in the form of 802.1x, 152-bit WEP and WPA. 
  • IP67 Casing
  • Bandwidth Control
  • Hot Standby
  • Wireless Isolation
  • Remote AP Control
  • MAC address Control
Technical Specifications
Wireless Features
- IEEE 802.11g compliant radio, up to 54 Mbps
- Up to 108Mbps wireless data rate at turbo mode
- RF Power Control. The transmit power can be adjusted by software control between 100% to 12.5% of maximum radio power
- Support seamless roaming within the same subnet between Access Point (In repeater and client mode)
Network (Internet and Intranet)
- Protocol filtering
Security and Access Control for Access Point Mode
- Support static WLAN WEP up to 152 bits encryption
- MAC Address Control
- 802.1x Authentication TLS (In Access Point mode)
- WPA-PSK (AES and TKIP) (In Access Point mode)
- Wireless to wireless user isolation
Management
- Web-based management
- IP address discovery software (Viper QuickStart)
- Firmware upgradeable through web-server and telnet
Hardware
- Antenna connector: 50-Ohm N Female antenna connector. (For external antenna connection)
- Chassis Type: IP67 Rating with Bracket for wall mounting
- Ethernet Port: One 10/100 Base-T (RJ-45 connector) with auto MDIX.
Power Specification
- Power adapter: 18~48V DC through RJ45, POE
- Power Consumption: Typical 6.5 Watts, 7.0 Watts Max
Environment
- Operating Temperature: 0șC to 50șC ambient temperature
- Relative Humidity When Operational: 20~90% (non-condensing)
- Storage Temperature: -20șC to +75șC ambient temperature
- Relative Humidity during storage: 95% Max (non-condensing)
Package
- Mounting brackets
- POE 48V DC injector
- RJ45 cable with IP67 termination
- Default antenna 2dbi
- N-type/SMA reverse antenna adaptor
RF Specification
Frequency Range 2.4 ~ 2.4835 GHz
Wireless Data Rate 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 Mbps 108Mbps for Turbo mode.
Channels 11 channels (USA/Canada), 13 Channels (Singapore, Europe except France), 14 Channels (Japan)
Transmitter output power 17dBm ± 2dBm
Nominal Antenna Port Impedance 50 Ω (for external antenna connector, if applicable)
Media Access Protocol CSMA/CA with ACK
Modulation Technique OFDM, CCK, DQPSK, DBPSK
Receiver Sensitivity Bit rate PER Signal
  54 Mbps 10% PER -68dBm
  48 Mbps 10% PER -68dBm
  36 Mbps 10% PER -75dBm
  24 Mbps 10% PER -79dBm
  18 Mbps 10% PER -82dBm
  12 Mbps 10% PER -84dBm
  11 Mbps 8% PER -82dBm
  9 Mbps 10% PER -87dBm
  6 Mbps 10% PER -88dBm
  5.5 Mbps 8% PER -85dBm
  2 Mbps 8% PER -86dBm
 
Accessories (Antennas-connectors)
MASTER - SLAVE Configuration
Mounting

Package:
POE DC Combiner
IP67 Network Cable
Mounting Brackets
N-SMA connector for Antenna
 
 
 
Features
> Support IEEE 802.11b & g simultaneously.
Wireless data rate up to 108 Mbps in turbo mode and up to 54 Mbps for WLAN g.
Support external antenna for better radio coverage.
User selectable radio power setting.
Support wireless seamless roaming
> One WAN Ethernet port
Mac clone 
Automatic detection of network devices. 
Support IP reservation by MAC address for server and printer. 
> Support static WEP 64, 128 & 152 bits encryption. 
Support 802.1x dynamic key exchange for EAP-TLS, EAP-PEAP, WPA-PSK and WPA with Radius server. 
Support wireless MAC address filtering or access control.
 
Downloads
AP1061POE catalog
user manual

© 2004 Entami Technologies - All rights reserved